Recaro Profi SPG XL

Please contact our seating application specialist for further details. Phone: 316-267-3001 or 877-683-3001 (9:30AM-5PM CST, M-F), or email: sales@autobahnpower.com
We can help you choose the Recaro that's right for your specific needs and will give you a quote for your purchase and installation.

The Profi XL FIA shell design – quality and high performance for beginners and professionals.

The Recaro Profi XL is the choice of champions- especially for the larger driver or  professional racer who appreciates the ultimate in ergonomically enhanced racing shells. The fiberglass reinforced plastic (GRP) shell mold which was specially adapted for the larger driver is 35 mm wider and 50 mm higher than the standard Profi and features taller and  larger belt guide ready for 4, 5, or 6 point belts. The Profi XL is almost an inch and a half wider than the standard Profi.  Link to standard size Profi. 

Standard features
Integrated headrest for reliable head protection, specifically designed shoulder support for optimum lateral hold, belt guides accept 4, 5, and 6-point harnesses, friction grip surface in the shoulder and seat area, well-defined side contours, these features combine to create excellent support through your fastest curves road racing or rally.

RECARO RACING SHELL INSTALLATION NOTICE: You will also need to purchase Recaro Side Mounts, and possibly Recaro Slider Track Kits and Custom Mount Brackets to install Recaro Racing Shells into your vehicle.

The Recaro Side Mounts are required as they bolt to the Recaro Racing Shell and allow it to be bolted down to the floorboard  Racers wanting a fixed seat position may use just the side mounts to allow for the lowest seating position.
The Recaro Slider Track Kits allow your Recaro Racing Shell to slide fore and aft and lock into position.

The Custom Mount Brackets bolt to Recaro Slider Track Kits and allow the seat to bolt into the factory floor holes. Custom Mount Brackets are available for many factory production cars but are not available for non factory "custom built" vehicles.  For these "custom" applications consult your local metal fabrication shop.

Link for: Recaro Slider Track Kits, Racing Shell Sidemounts and Harness Pads.

NOTE: Lead time on Profi XL is 4-6 weeks. These custom orders are non cancelable and non refundable and non returnable. This makes it very important for purchaser to compare the measurements below to the current seat & space in the vehicle to be sure seat will physically fit.

NOTE: To Convert Millimeters to Inches:  Divide Millimeters by 25.4

Seat Height 880mm (34.6")

Seat Weight: 19.8 lbs. (Total Shell Weight without mounted parts)

Maximum shoulder width: 580mm (22.8")


            


 

FIA approved and crash tested.